GARTT ML3508 700KV Brushless Motor For DJI E600 Multirotor Quadcopter Hexrcopter RC DIY Hobby
Free Shipping Included! GARTT ML3508 700KV Brushless Motor For DJI E600 Multirotor Quadcopter Hexrcopter RC DIY Hobby by GARTT at Racing Drones For Sale. MPN: FBAMT-024. Hurry! Limited time offer. Offer valid only while supplies last. Specification, Motor KV :700KV RPM/V Motor Resistance (RM) :0.0746 Ω Idle Current (Io/10V) :0.5A/10V Max Continuous Current :28A Max Continuous
Motor KV :700KV RPM/V
Motor Resistance (RM) :0.0746 Ω
Idle Current (Io/10V) :0.5A/10V
Max Continuous Current :28A
Max Continuous Power :460W
Max Lipo Cell :4S
Motor Diameter :42mm/1.651in
Motor Body Length :25.5mm/1.004in
No. of Stator Arms 12
Pole Count :14
Overall Shaft Length :33.6mm/1.32in
Shaft Diameter :3.175mm/0.125in
Bolt holes spacing :19mm/25mm/0.75in/0.98in
Bolt thread :M3×6
When using the screws we provide, pay attention to the thickness of the motor mounting plate. If the mounting plate is too thin, it may cause the screws to be too long to be pushed up to the motor coil.
Features & Highlights
- High magnetic energy NdFeB magnet steel-N45SH with 150 degrees heat-resistant.
- To support the high speed(up to 15000 spin), we used the Imported Japanese NMB Bearing and HRC55 degrees stainless steel Axis.
- Using the heat-resistant varnished wire enwinding the motor coil, 600mm weld wire(extra-soft silicone wire) can be cut optionally.
- Each rotor was balanced with high speed,ensure the motor high-speed runnung without shake.
- The vane-type design can reduce motor temperature with a big cloud of steam.
|Item Weight:||0.23 pounds|
|Package Weight:||0.65 pounds|
|Package Size:||3.82 x 3.19 x 3.19 inches|